Carbon Fiber Angles - 16 inch

Elevated Materials angles are press molded using a 0/90 layup schedule, where fibers alternate in the 0 and 90 deg directions. This balance of fiber directions provides a good balance of cost and mechanical properties and is suited for most applications.

All Elevated Materials angles press molded, yeilding an extremely low void fraction and a smooth finish on both sides.

Typical applications for these plates include: Drones, Industrial Robotics, Automotice and Marine Dash Panels, Cosmetic Covers, Scientic Equipment and more.

Contact us if you would like to request a custom layup schedule, cut size, surface finish, material type, or thickness. We are always happy to help.

est=”toast-list”>

Showing all 8 results

Carbon Fiber Angle – Twill Weave – 0.0625in Thick – 5in x 16in
$100.88 Add to cart
Carbon Fiber Angle – Plain Weave – 0.0625in Thick – 5in x 16in
$100.88 Add to cart
Carbon Fiber Angle – Twill Weave – 0.125in Thick – 5in x 16in
$172.98 Add to cart
Carbon Fiber Angle – Plain Weave – 0.125in Thick – 5in x 16in
$172.98 Add to cart
Carbon Fiber Angle – Twill Weave – 0.188in Thick – 5in x 16in
$237.71 Add to cart
Carbon Fiber Angle – Plain Weave – 0.188in Thick – 5in x 16in
$237.71 Add to cart
Carbon Fiber Angle – Twill Weave – 0.25in Thick – 5in x 16in
$302.44 Add to cart
Carbon Fiber Angle – Plain Weave – 0.25in Thick – 5in x 16in
$302.44 Add to cart

Carbon Fiber Angle – Twill Weave – 0.0625in Thick – 5in x 16in

Carbon Fiber Angle – Plain Weave – 0.0625in Thick – 5in x 16in

Carbon Fiber Angle – Twill Weave – 0.125in Thick – 5in x 16in

Carbon Fiber Angle – Plain Weave – 0.125in Thick – 5in x 16in

Carbon Fiber Angle – Twill Weave – 0.188in Thick – 5in x 16in

Carbon Fiber Angle – Plain Weave – 0.188in Thick – 5in x 16in

Carbon Fiber Angle – Twill Weave – 0.25in Thick – 5in x 16in

Carbon Fiber Angle – Plain Weave – 0.25in Thick – 5in x 16in