Carbon Fiber Sheet – Twill Weave – 3/32″ Thick – 24″ x 60″
$709.85
100% Pure Carbon Fiber sheet
Description
Elevated Materials standard sheets are manufactured using a 0/90 layup schedule, where fibers alternate in the 0 and 90 deg directions. This balance of fiber directions provides a good balance of cost and mechanical properties and is suited for most applications.
All Elevated Materials sheets are manufactured in a hot press, yielding an extremely low void fraction.
Typical applications for these plates include: Drones, Industrial Robotics, Automotive and Marine Dash Panels, Cosmetic Covers, Scientific Equipment and more.
Contact us if you would like to request a custom layup schedule, cut size, surface finish, material type, or thickness. We are always happy to help.
Additional information
Weight | 7.7344 lbs |
---|---|
Dimensions | 24 × 60 × 0.0938 in |
Part Thickness | 3/32" |
Part Width | 24" |
Part Length | 60" |
Surface Style | Twill Weave |
Units | Imperial |
Tolerances
Above are the standard thickness tolerances. Tighter tolerances can be achieved with specific materials or with post-process plaining. Please contact us if your application requires tolerances tighter than our standards.Above are the standard thickness tolerances. Tighter tolerances can be achieved with specific materials or with post-process plaining. Please contact us if your application requires tolerances tighter than our standards.
Standard cuts are made on the tile saw and have a tolerance of +.125 inches and -0.0 inches. Tighter tolerances can be achieved with other cutting operations. Please contact us for requests about custom cuts and tighter tolerances.