Carbon Fiber Sheet – Checker Weave – 1/16″ Thick – 12″ x 12″

$30.44

100% Pure Carbon Fiber sheet

Out of stock

SKU: 12130180 Category:

Description

Elevated Materials standard sheets are manufactured using a 0/90 layup schedule, where fibers alternate in the 0 and 90 deg directions. This balance of fiber directions provides a good balance of cost and mechanical properties and is suited for most applications.

All Elevated Materials sheets are manufactured in a hot press, yielding an extremely low void fraction.

Typical applications for these plates include: Drones, Industrial Robotics, Automotive and Marine Dash Panels, Cosmetic Covers, Scientific Equipment and more.

Contact us if you would like to request a custom layup schedule, cut size, surface finish, material type, or thickness. We are always happy to help.

Data Sheet Download

Data Sheet PDF Download

Additional information

Weight 0.5156 lbs
Dimensions 12 × 12 × 0.0625 in
Part Thickness

1/16"

Part Width

12"

Part Length

12"

Surface Style

Checker Weave

Units

Imperial

Tolerances

Thickness Tolerances

Above are the standard thickness tolerances. Tighter tolerances can be achieved with specific materials or with post-process plaining. Please contact us if your application requires tolerances tighter than our standards.Above are the standard thickness tolerances. Tighter tolerances can be achieved with specific materials or with post-process plaining. Please contact us if your application requires tolerances tighter than our standards.

Length and Width Tolerances

Standard cuts are made on the tile saw and have a tolerance of +.125 inches and -0.0 inches. Tighter tolerances can be achieved with other cutting operations. Please contact us for requests about custom cuts and tighter tolerances.