Carbon Fiber Angle – Twill Weave – 1/8″ Thick – 16″ x 3″

$123.85

SKU: 12150002 Category: Tags: , ,

Description

Elevated Materials angles are press molded using a 0/90 layup schedule, where fibers alternate in the 0 and 90 deg directions. This balance of fiber directions provides a good balance of cost and mechanical properties and is suited for most applications.

All Elevated Materials angles press molded, yeilding an extremely low void fraction and a smooth finish on both sides.

Typical applications for these angles include: Drones, Industrial Robotics, Automotice and Marine Dash Panels, Cosmetic Covers, Scientic Equipment and more.

Contact us if you would like to request a custom layup schedule, cut size, surface finish, material type, or thickness. We are always happy to help.

 

Data Sheet Download

Data Sheet PDF Download

Additional information

Weight 0.7 lbs
Dimensions 16 × 3 × 0.125 in
Leg A Width

3in

Leg B Width

3in

Cosmetic Style

Twill Weave

Part Thickness

1/8"

Part Length

16"

Units

Imperial

Surface Finish

Matte / Matte

Surface Texture

Smooth

Tg (Glass Transition Temp)

>= 250F (121C)

Tolerances

Thickness Tolerances

Above are the standard thickness tolerances. Tighter tolerances can be achieved with specific materials or with post-process plaining. Please contact us if your application requires tolerances tighter than our standards.Above are the standard thickness tolerances. Tighter tolerances can be achieved with specific materials or with post-process plaining. Please contact us if your application requires tolerances tighter than our standards.

Length and Width Tolerances

Standard cuts are made on the tile saw and have a tolerance of +.125 inches and -0.0 inches. Tighter tolerances can be achieved with other cutting operations. Please contact us for requests about custom cuts and tighter tolerances.